header pic

Perhaps the BEST B1G Forum anywhere, here at College Football Fan Site, CFB51!!!

The 'Old' CFN/Scout Crowd- Enjoy Civil discussion, game analytics, in depth player and coaching 'takes' and discussing topics surrounding the game. You can even have your own free board, all you have to do is ask!!!

Anyone is welcomed and encouraged to join our FREE site and to take part in our community- a community with you- the user, the fan, -and the person- will be protected from intrusive actions and with a clean place to interact.


Author

Topic: 2019 Offseason Stream of Unconsciousness

 (Read 127229 times)

betarhoalphadelta

  • Global Moderator
  • Hall of Fame
  • *****
  • Posts: 12128
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #742 on: April 11, 2019, 10:45:58 AM »
Something like this? 


https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9/

I don't know if that's the right size for your application  but searching for "screw extractor kit" is a good start. I'm sure they have them at all the hardware stores too if you don't want to wait for Amazon. 

utee94

  • Global Moderator
  • Hall of Fame
  • *****
  • Posts: 17617
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #743 on: April 11, 2019, 10:53:12 AM »
Yes, if you can't get some needle-nose pliers onto the edges of the screw and twist it out that way, then you're going to need to use one of those screw extractor kits.  They work pretty well, but the smaller the screw, the smaller the extractor you'll need, and there's a certain point where there's just not enough metal left to insert and grip.


Cincydawg

  • Oracle of Piedmont Park
  • Global Moderator
  • Hall of Fame
  • *****
  • Default Avatar
  • Posts: 71095
  • Oracle of Piedmont Park
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #744 on: April 11, 2019, 11:04:42 AM »
Between the end of 1945 and July 1946, Hungary went through the worst inflation ever recorded. In 1944, the highest denomination[clarification needed] was 1,000 pengő. By the end of 1945, it was 10,000,000 pengő. The highest denomination in mid-1946 was 100,000,000,000,000,000,000 (1020) pengő. A special currency, the adópengő – or tax pengő – was created for tax and postal payments.[40] The value of the adópengő was adjusted each day, by radio announcement. On 1 January 1946 one adópengő equaled one pengő. By late July, one adópengő equaled 2,000,000,000,000,000,000,000 or 2×1021 (2 sextillion) pengő. When the pengő was replaced in August 1946 by the forint, the total value of all Hungarian banknotes in circulation amounted to 1/1,000 of one US dollar.[41] This is the most severe known incident of inflation recorded, peaking at 1.3 × 1016 percent per month (prices double every 15 hours).[42] The overall impact of hyperinflation: On 18 August 1946, 400,000,000,000,000,000,000,000,000,000 or 4×1029 (four hundred quadrilliard on the long scale used in Hungary; four hundred octillion on short scale) pengő became 1 forint.

FearlessF

  • Hall of Fame
  • *****
  • Posts: 37369
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #745 on: April 11, 2019, 11:09:40 AM »
Yes, if you can't get some needle-nose pliers onto the edges of the screw and twist it out that way, then you're going to need to use one of those screw extractor kits.  They work pretty well, but the smaller the screw, the smaller the extractor you'll need, and there's a certain point where there's just not enough metal left to insert and grip.
can always just drill it out and replace with a nut & bolt
"Courage; Generosity; Fairness; Honor; In these are the true awards of manly sport."

FearlessF

  • Hall of Fame
  • *****
  • Posts: 37369
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #746 on: April 11, 2019, 11:12:21 AM »
I am starting to struggle just a bit getting into the GTI, which apparently is 0.4" lower than the usual Golf.  I've been working out and stretching, and it's starting to be a chore.  Getting into a car like a Corvette at my age starts to be a real chore.  I can see why folks like SUVs (some, I hate'em personally).

Guys my age like to buy that flashy car they dreamed about all their lives, which is fine, but it starts to be impractical.  I know one can pick up a used nice Corvette for quite the discount.
Derned C8 Vette needs to hit the dealerships so guys will trade up to the mid-engine and flood the market with used Vettes
driving down the price of my C6
SUVs are simply glorified miniVans - hate em
"Courage; Generosity; Fairness; Honor; In these are the true awards of manly sport."

Drew4UTk

  • Administrator
  • Hall of Fame
  • *****
  • Posts: 10151
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #747 on: April 11, 2019, 11:16:23 AM »
Another one. I was trying to adjust the wheels on the screen door where we live and one of the screw heads is stripped. Anyone have a suggestion on removing this screw so I can replace it? Problem is it's recessed and I can't get at it with anything I have on hand. Is there a bit I can buy that will do the deed? Ugh.
eff drilling it out or anything else complicated... it's just a screen door.  super glue on the allen key head, a few seconds set time, take it out. 
if you're working with machinery of any kind, yeah- you'd need to drill it out or use an extractor as not to screw up the device.... but... it's a screen door.  super glue is your friend.  just replace it, or, after adjusting it set it back in place with it still glued to the key... and break the key off (the glue will break before anything else).  

847badgerfan

  • Administrator
  • Hall of Fame
  • *****
  • Posts: 25029
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #748 on: April 11, 2019, 11:17:02 AM »
can always just drill it out and replace with a nut & bolt
That won't work here. If I could get at it, I could do that. But I can't get at it.
Thanks guys. I'll look at the extractor bit.
U RAH RAH! WIS CON SIN!

847badgerfan

  • Administrator
  • Hall of Fame
  • *****
  • Posts: 25029
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #749 on: April 11, 2019, 11:18:20 AM »
eff drilling it out or anything else complicated... it's just a screen door.  super glue on the allen key head, a few seconds set time, take it out.
if you're working with machinery of any kind, yeah- you'd need to drill it out or use an extractor as not to screw up the device.... but... it's a screen door.  super glue is your friend.  just replace it, or, after adjusting it set it back in place with it still glued to the key... and break the key off (the glue will break before anything else).  
This I like. So I just waste an allen key?
U RAH RAH! WIS CON SIN!

utee94

  • Global Moderator
  • Hall of Fame
  • *****
  • Posts: 17617
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #750 on: April 11, 2019, 11:29:12 AM »
Derned C8 Vette needs to hit the dealerships so guys will trade up to the mid-engine and flood the market with used Vettes
driving down the price of my C6
SUVs are simply glorified miniVans - hate em
Large SUVs are built on truck chassis not car chassis, so they're great for towing while a minivan is not.
I actually prefer my SUV over my pickup for towing, it's better suited for hauling the type of gear I need than a pickup, and it's also better on a slick boat ramp.  Unfortunately modern SUVs are trending lower on towing capacity rather than increasing. There's no longer a 3/4 ton SUV on the market so around 9,000 lbs is the max towing you can get anymore.  Which is why I had to get a pickup for the new RV.

utee94

  • Global Moderator
  • Hall of Fame
  • *****
  • Posts: 17617
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #751 on: April 11, 2019, 11:31:57 AM »
eff drilling it out or anything else complicated... it's just a screen door.  super glue on the allen key head, a few seconds set time, take it out.
if you're working with machinery of any kind, yeah- you'd need to drill it out or use an extractor as not to screw up the device.... but... it's a screen door.  super glue is your friend.  just replace it, or, after adjusting it set it back in place with it still glued to the key... and break the key off (the glue will break before anything else).  
Sounds way more complicated than using the extractor bit which is designed specifically for this purpose, but whatever floats your boat.  :)
I have multiple sets of extractors, if I didn't I guess I might consider a different way?  But it's not like extractor sets are expensive...

Drew4UTk

  • Administrator
  • Hall of Fame
  • *****
  • Posts: 10151
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #752 on: April 11, 2019, 11:34:30 AM »
or you use acetone and let it set in it for a bit, and remove the softened glue with a paper towel... your wife will wonder why you have an allen key in her fingernail polish remover, but you can tell her it's Drew's Fault. 
 

MrNubbz

  • Hall of Fame
  • *****
  • Default Avatar
  • Posts: 17098
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #753 on: April 11, 2019, 11:35:58 AM »
Between the end of 1945 and July 1946, Hungary went through the worst inflation ever recorded. 
CD where did that come from?We went from nitrogen filled tires and screw extraction to horrible Hungarian mid '40's inflation  :017:.There wasn't even an attempt to disguise that thread hi-jack   :bluegrab:
Suburbia:Where they tear out the trees & then name streets after them.

MrNubbz

  • Hall of Fame
  • *****
  • Default Avatar
  • Posts: 17098
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #754 on: April 11, 2019, 11:39:10 AM »
but you can tell her it's Drew's Fault.
Thanx,that'll be like American Express - I won't leave home w/o it
Suburbia:Where they tear out the trees & then name streets after them.

Cincydawg

  • Oracle of Piedmont Park
  • Global Moderator
  • Hall of Fame
  • *****
  • Default Avatar
  • Posts: 71095
  • Oracle of Piedmont Park
  • Liked:
Re: 2019 Offseason Stream of Unconsciousness
« Reply #755 on: April 11, 2019, 01:23:08 PM »
So the wife's car has nitrogen in the tires. Can you switch back to regular air?
Badger started talking about inflation before I did, so my post is NOT a diversion out of the blue, at all.
I resemble that remark as I am well known for not ever mostly diverting typical threads usually into other areas for the most part.

 

Support the Site!
Purchase of every item listed here DIRECTLY supports the site.